 |
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
| |
Colour
Changer for 2 to 24 colours for 2.5 kW- 5 kW 250
mm Fresnel Luminaires DMX 512 and 0/+10V
-
Delivered with LTM, STRAND, DESISTI and ADB adapter.
- Octagonal 305 / 320 mm Ø 280
- Octagonal 326 / 340 mm Ø 280
- 
340 x 340 Ø 280
PRESENTATION
Door mounted on hinges with 2 quick closing latches.
4 small brackets of which one can be turned to allow
for the mounting of a barndoor or a filter.
|
|
|
| |
 |
VENTILATION
Override
gel ventilation using 2 Ø 92 mm fans.
3 modes are possible :
Fan set at maximum or off according to the lighting
of the photoelectric cell.
Fan speed controlled from 0 to 100% by the control
desk.
Fan speed controlled by using the encoding wheels
(from 40% to 100 %).
|
|
| |
|
|
SPECIFICATIONS
- 2 to 24 colours
- Maximum gel roll length : 14m
- 3 scrolling speeds
- Fastest scrolling speeds :
7 secs for 24 colours 4.5 secs for 16 colours.
- Dimensions :
Height : 515 mm
Width : 475 mm
Depth : 85 mm
- Weight : 5.7 kg.
|
| |
|
|
|
| |
Standard
adapters :
|
|
| |
|
|
|
|
| |
 OPERATING
|
- Colour
changer with gel roll. Gel roll (not supplied)
needs to be joined with high temperature
tape.
- Dual
DC motors ensure that the gel roll remains
tight.
- Incorporated
230/240V power supply allows a single colour
changer to be used and easy DMX 512 wiring;
3x0.222
cable, chain with other devices, dimmers,
shutters, automatic luminaires ...
- In
analog mode, the maximum number of colours
depends on the precision of the control
desk.
- Power
supply card and microcontroller card can
be disconnected from the front.
|
| REMOTE
CONTROL |
- DMX
512: high impedance. Analog : 0/+10 V DC
/1mA.
-
Input and output through male and female
XLR 5 sockets at the rear.
- The
control of other changers is possible even
if one changer in the link has failed or
if the power is off.
- In
the case of signal or power loss, the last
gel position is maintained.
- Yellow
«DATA SIGNAL» LED flashes in proportion
to the data value.
- In
analog mode, it is possible to adjust the
levels of the control desk at 0 or 10 volts.
|
| ASSIGNMENT
OF CHANNEL NUMBERS |
- 3
encoding wheels at the front :
001 to 512 : control of the colour changer
in DMX 512 000
000 : analog control
513 to 599 : supplementary functions : ventilation,
scrolling speed, automatic loading, check/test
|
| COLOUR
CALIBRATION |
- The
length of the gel roll can vary according
to the number of colours to be used as long
as the maximum length is not exceeded.
- After
loading the gel roll, an initialization
cycle calculates the length of the gel and
then divides it into 256 levels to be DMX
512 compatible
|
| VENTILATION
|
- Override
gel ventilation.
3 modes are possible :
- Fan set at maximum or off according to
the lighting of the photoelectric cell.
- Fan speed controlled from 0 to 100% by
the control desk.
- Programmable fan speed, between 40% and
100 %
- Green
‘FAN’ LED is lit for maximum ventilation
and will flash when ventilation is reduced.
|
| PROTECTION
|
- In
the event of jamming the power to the motors
is automatically cut.
- Red
‘ALARM’ LED indicates malfunction: roller
jam, gel roll detaching from the roller,
incorrect positioning of the gel etc.
- Reset
of alarms on the changer or from the control
desk.
|
|
|
|
|
|
|
 |
|
|
