 |
| |
|
|
|
|
| |
|
|
| |
Colour
Changer for 2 to 30 colours / Dichroic bank DMX 512
New
2002 model
Pianissimo !
Now, heat shield glass means this model is the perfect
complement for music events. Can be used with the
fans at minimum . theatre, opera, dance, TV, concert,
...
LAMP
BANK
16 low voltage dichroic lamps (not included) connected
in series. 1 circuit power supply , bulbs maximum
75 W.
VENTILATION
Override
gel ventilation using 4 Ř 92 mm fans. (2 in, 2 out)
2 modes are possible :
Fan speed controlled from 0 to 100% by the control
desk.
Fan speed controlled by using the encoding wheels
(from 40% to 100 %).
|
|
|
| |
|
SPECIFICATIONS
- 2 to 30 colours
- Maximum gel roll length : 14m
- 3 scrolling speeds
- Fastest scrolling speeds : 8 secs for 30 colours
- Dimensions :
Colour changer aperture : 880 x 145 mm
Height
: 1160 mm
Width
: 370 mm
Depht
:
Colour
changer: 100 mm
With
dichroic bank : 200 mm
- Weight with the dichroic bank : 20 kg
|
|
| |
|
|
| |
|
|
|
|
| |
 OPERATING
|
- Colour
changer with gel roll. Gel roll (not supplied)
needs to be joined with high temperature tape.
- Dual
DC motors ensure that the gel roll remains
tight.
- Incorporated
230/240V power supply allows a single colour
changer to be used and easy DMX 512 wiring;
3x0.222 cable,
chain with other devices, dimmers, shutters,
automatic luminaires ...
|
| REMOTE
CONTROL |
- DMX
512: high impedance.
-
Input and output through male and female XLR
5 sockets at the rear.
- The
control of other changers is possible even
if one changer in the link has failed or if
the power is off.
- In
the case of signal or power loss, the last
gel position is maintained.
- Yellow
«DATA SIGNAL» LED flashes in proportion to
the data value.
|
| ASSIGNMENT
OF CHANNEL NUMBERS |
- 3
encoding wheels at the front :
001 to 512 : control of the colour changer
in DMX 512 000
513 to 599 : supplementary functions : ventilation,
scrolling speed, automatic loading, check/test
|
| COLOUR
CALIBRATION |
- The
length of the gel roll can vary according
to the number of colours to be used as long
as the maximum length is not exceeded.
- After
loading the gel roll, an initialization cycle
calculates the length of the gel and then
divides it into 256 levels to be DMX 512 compatible
|
| VENTILATION
|
- Override
gel ventilation.
2 modes are possible :
- Fan speed controlled from 0 to 100% by the
control desk.
- Programmable fan speed, between 40% and
100 %
- Green
‘FAN’ LED is lit for maximum ventilation and
will flash when ventilation is reduced.
|
| PROTECTION
|
- In
the event of jamming the power to the motors
is automatically cut.
- Red
‘ALARM’ LED indicates malfunction: roller
jam, gel roll detaching from the roller, incorrect
positioning of the gel etc.
- Reset
of alarms on the changer or from the control
desk.
|
|
|
|
|
|
|
 |
|
|
